Support truck for the broadcasting stations of the Estonian Public Broadcasting

Date

13.04.21

The broadcasting truck has two separate compartments: one for the crew and one for the cargo.

The Volvo support truck for the Estonian Public Broadcasting company has a separate compartment for the crew and a cargo area. There is plenty of storage facilities for the various TV equipment but also other solutions that make working on the truck comfortable.

Folding staircase under the door on the right side.
Curtain at the back of the truck.
Stainless steel shelves in the cargo area.
The shelves on the right are equipped with luggage cases from the German producer Aluca.
Crew compartment separated by partitioning at the front of the truck. The room can be closed with a sliding door. The walls of the room are covered with gray textile.
General lighting of the truck by a LED strip. LED floodlights with separate circuits above the side door and above the tailgate.
LED strobe lights are installed around the upper outer edge of the truck and at the front of the cab.
General lighting in the crew compartment LED strips in the ceiling, separate LED fixtures with touch-sensitive switches above the tables.
Ventilation hatch with a transparent cover that can be opened in the crew compartment ceiling.
Fridge in the crew compartment.
2 Aluca drawers in the crew compartment.
On the floor of the crew compartment, there is an opening with a hatch for cables.
A full-width bench in the crew compartment. Bench plate with hinges, opening up. Textile backrest with a velcro fastening on the bench. The bench is also covered with removable cushions. The bottom of the bench opens from the outside with a hatch. The bottom of the bench is designed to store microphone and camera stands. Drawers divided into sections open to the side from the storage.
An opening that can be closed with a hatch in the crew compartment wall to connect an air conditioner to the outside environment.
Cabinets at the upper side of the walls in the crew compartment, doors open up on gas springs.
Stainless steel toolboxes on both sides of the truck.
Electrical installation 230/400V. Different plugs inside and outside. The electrical circuits are protected by residual current devices and circuit breakers.
Electrical connections to the external network 380V and 220V.
Intelligent battery charger for charging the truck batteries 24V.
The area in the cargo space between shelves is covered with a non-slip rubber cover. The same cover on the floor of the crew compartment.
Reversing camera with 7″ screen in the driver’s cab. The camera has LED lighting and an electric cover.
The vehicle has a type approval certificate and meets the technical requirements of the Road Administration.