We covered the walls of the van with 6.5 mm thick laminated waterproof plywood. An aluminum fixture is installed on the side and front wall for convenient attachment of various accessories.

We installed load belts at a height of 300-400 mm on the sides and front wall for convenient attachment of cargo.

In the cargo room, we installed various shelving systems and worktops from the German company Aluca for storing items and working comfortably.

The interior of the cargo space is illuminated by two LED strips on the ceiling. The switch is located by the side door and at the back of the cargo area.

Accessories and equipment:

• Additional battery AGM 95 Ah with disconnection relay.
• Air hose reel 3/8 inch 15 m.
• Electric cable reel 16 + 2 m, cross-section 1.5 mm2.
• Inverter 12/230V 700W.
• Piston compressor with 12V power supply 10 bar. Air receiver 15 l.
• Pull-out vices (run 150 mm).
• Electrical installations 220V AC and 12 V DC with protection devices. Sockets above the table. Plug in the cab.

Contact Worxpace PRO if you have any questions about professional workspaces on wheels!